Public Types
Public Member Functions
- num_put (size_t __refs=0)
- iter_type put (iter_type __s, ios_base &__io, char_type __fill, bool __v) const
- iter_type put (iter_type __s, ios_base &__io, char_type __fill, const void *__v) const
- iter_type put (iter_type __s, ios_base &__io, char_type __fill, long __v) const
- iter_type put (iter_type __s, ios_base &__io, char_type __fill, unsigned long __v) const
- iter_type put (iter_type __s, ios_base &__io, char_type __fill, long long __v) const
- iter_type put (iter_type __s, ios_base &__io, char_type __fill, unsigned long long __v) const
- iter_type put (iter_type __s, ios_base &__io, char_type __fill, double __v) const
- iter_type put (iter_type __s, ios_base &__io, char_type __fill, long double __v) const
Static Public Attributes
- static locale::id id
Protected Member Functions
- virtual ~num_put ()
- void _M_group_float (const char *__grouping, size_t __grouping_size, char_type __sep, const char_type *__p, char_type *__new, char_type *__cs, int &__len) const
- void _M_group_int (const char *__grouping, size_t __grouping_size, char_type __sep, ios_base &__io, char_type *__new, char_type *__cs, int &__len) const
- template<typename _ValueT > iter_type _M_insert_float (iter_type, ios_base &__io, char_type __fill, char __mod, _ValueT __v) const
- template<typename _ValueT > iter_type _M_insert_int (iter_type, ios_base &__io, char_type __fill, _ValueT __v) const
- void _M_pad (char_type __fill, streamsize __w, ios_base &__io, char_type *__new, const char_type *__cs, int &__len) const
- virtual iter_type do_put (iter_type __s, ios_base &__io, char_type __fill, bool __v) const
- virtual iter_type do_put (iter_type __s, ios_base &__io, char_type __fill, long __v) const
- virtual iter_type do_put (iter_type __s, ios_base &__io, char_type __fill, unsigned long __v) const
- virtual iter_type do_put (iter_type __s, ios_base &__io, char_type __fill, long long __v) const
- virtual iter_type do_put (iter_type __s, ios_base &__io, char_type __fill, unsigned long long __v) const
- virtual iter_type do_put (iter_type, ios_base &, char_type, double) const
- virtual iter_type do_put (iter_type, ios_base &, char_type, long double) const
- virtual iter_type do_put (iter_type, ios_base &, char_type, const void *) const
Static Protected Member Functions
- static __c_locale _S_clone_c_locale (__c_locale &__cloc) throw ()
- static void _S_create_c_locale (__c_locale &__cloc, const char *__s, __c_locale __old=0)
- static void _S_destroy_c_locale (__c_locale &__cloc)
- static __c_locale _S_get_c_locale ()
- static const char * _S_get_c_name () throw ()
- static __c_locale _S_lc_ctype_c_locale (__c_locale __cloc, const char *__s)
Friends
Detailed Description
template<typename _CharT, typename _OutIter>
class std::num_put< _CharT, _OutIter >
Primary class template num_put.
This facet encapsulates the code to convert a number to a string. It is used by the ostream numeric insertion operators.
The num_put template uses protected virtual functions to provide the actual results. The public accessors forward the call to the virtual functions. These virtual functions are hooks for developers to implement the behavior they require from the num_put facet.
Definition at line 2253 of file locale_facets.h.
Member Typedef Documentation
| typedef _CharT std::num_put< _CharT, _OutIter >::char_type |
Public typedefs.
Definition at line 2259 of file locale_facets.h.
| typedef _OutIter std::num_put< _CharT, _OutIter >::iter_type |
Public typedefs.
Definition at line 2260 of file locale_facets.h.
Constructor & Destructor Documentation
| std::num_put< _CharT, _OutIter >::num_put | ( | size_t | __refs = 0 | ) | [inline, explicit] |
Constructor performs initialization.
This is the constructor provided by the standard.
- Parameters:
-
__refs Passed to the base facet class.
Definition at line 2274 of file locale_facets.h.
| virtual std::num_put< _CharT, _OutIter >::~num_put | ( | ) | [inline, protected, virtual] |
Destructor.
Definition at line 2453 of file locale_facets.h.
Member Function Documentation
| _OutIter std::num_put< _CharT, _OutIter >::do_put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| bool | __v | ||
| ) | const [protected, virtual] |
Numeric formatting.
These functions do the work of formatting numeric values and inserting them into a stream. This function is a hook for derived classes to change the value returned.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 1091 of file locale_facets.tcc.
References std::ios_base::_M_getloc(), std::ios_base::adjustfield, std::ios_base::boolalpha, std::ios_base::flags(), std::ios_base::left, and std::ios_base::width().
| virtual iter_type std::num_put< _CharT, _OutIter >::do_put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| long | __v | ||
| ) | const [inline, protected, virtual] |
Numeric formatting.
These functions do the work of formatting numeric values and inserting them into a stream. This function is a hook for derived classes to change the value returned.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2473 of file locale_facets.h.
| virtual iter_type std::num_put< _CharT, _OutIter >::do_put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| unsigned long | __v | ||
| ) | const [inline, protected, virtual] |
Numeric formatting.
These functions do the work of formatting numeric values and inserting them into a stream. This function is a hook for derived classes to change the value returned.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2477 of file locale_facets.h.
| virtual iter_type std::num_put< _CharT, _OutIter >::do_put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| long long | __v | ||
| ) | const [inline, protected, virtual] |
Numeric formatting.
These functions do the work of formatting numeric values and inserting them into a stream. This function is a hook for derived classes to change the value returned.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2483 of file locale_facets.h.
| virtual iter_type std::num_put< _CharT, _OutIter >::do_put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| unsigned long long | __v | ||
| ) | const [inline, protected, virtual] |
Numeric formatting.
These functions do the work of formatting numeric values and inserting them into a stream. This function is a hook for derived classes to change the value returned.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2488 of file locale_facets.h.
| _OutIter std::num_put< _CharT, _OutIter >::do_put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| double | __v | ||
| ) | const [protected, virtual] |
Numeric formatting.
These functions do the work of formatting numeric values and inserting them into a stream. This function is a hook for derived classes to change the value returned.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 1143 of file locale_facets.tcc.
| _OutIter std::num_put< _CharT, _OutIter >::do_put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| long double | __v | ||
| ) | const [protected, virtual] |
Numeric formatting.
These functions do the work of formatting numeric values and inserting them into a stream. This function is a hook for derived classes to change the value returned.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 1157 of file locale_facets.tcc.
| _OutIter std::num_put< _CharT, _OutIter >::do_put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| const void * | __v | ||
| ) | const [protected, virtual] |
Numeric formatting.
These functions do the work of formatting numeric values and inserting them into a stream. This function is a hook for derived classes to change the value returned.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 1164 of file locale_facets.tcc.
References std::ios_base::flags(), std::ios_base::hex, and std::ios_base::uppercase.
| iter_type std::num_put< _CharT, _OutIter >::put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| bool | __v | ||
| ) | const [inline] |
Numeric formatting.
Formats the boolean v and inserts it into a stream. It does so by calling num_put::do_put().
If ios_base::boolalpha is set, writes ctype<CharT>::truename() or ctype<CharT>::falsename(). Otherwise formats v as an int.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2292 of file locale_facets.h.
| iter_type std::num_put< _CharT, _OutIter >::put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| long | __v | ||
| ) | const [inline] |
Numeric formatting.
Formats the integral value v and inserts it into a stream. It does so by calling num_put::do_put().
Formatting is affected by the flag settings in io.
The basic format is affected by the value of io.flags() & ios_base::basefield. If equal to ios_base::oct, formats like the printf o specifier. Else if equal to ios_base::hex, formats like x or X with ios_base::uppercase unset or set respectively. Otherwise, formats like d, ld, lld for signed and u, lu, llu for unsigned values. Note that if both oct and hex are set, neither will take effect.
If ios_base::showpos is set, '+' is output before positive values. If ios_base::showbase is set, '0' precedes octal values (except 0) and '0[xX]' precedes hex values.
Thousands separators are inserted according to numpunct::grouping() and numpunct::thousands_sep(). The decimal point character used is numpunct::decimal_point().
If io.width() is non-zero, enough fill characters are inserted to make the result at least that wide. If (io.flags() & ios_base::adjustfield) == ios_base::left, result is padded at the end. If ios_base::internal, then padding occurs immediately after either a '+' or '-' or after '0x' or '0X'. Otherwise, padding occurs at the beginning.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2334 of file locale_facets.h.
| iter_type std::num_put< _CharT, _OutIter >::put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| unsigned long | __v | ||
| ) | const [inline] |
Numeric formatting.
Formats the integral value v and inserts it into a stream. It does so by calling num_put::do_put().
Formatting is affected by the flag settings in io.
The basic format is affected by the value of io.flags() & ios_base::basefield. If equal to ios_base::oct, formats like the printf o specifier. Else if equal to ios_base::hex, formats like x or X with ios_base::uppercase unset or set respectively. Otherwise, formats like d, ld, lld for signed and u, lu, llu for unsigned values. Note that if both oct and hex are set, neither will take effect.
If ios_base::showpos is set, '+' is output before positive values. If ios_base::showbase is set, '0' precedes octal values (except 0) and '0[xX]' precedes hex values.
Thousands separators are inserted according to numpunct::grouping() and numpunct::thousands_sep(). The decimal point character used is numpunct::decimal_point().
If io.width() is non-zero, enough fill characters are inserted to make the result at least that wide. If (io.flags() & ios_base::adjustfield) == ios_base::left, result is padded at the end. If ios_base::internal, then padding occurs immediately after either a '+' or '-' or after '0x' or '0X'. Otherwise, padding occurs at the beginning.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2338 of file locale_facets.h.
| iter_type std::num_put< _CharT, _OutIter >::put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| long long | __v | ||
| ) | const [inline] |
Numeric formatting.
Formats the integral value v and inserts it into a stream. It does so by calling num_put::do_put().
Formatting is affected by the flag settings in io.
The basic format is affected by the value of io.flags() & ios_base::basefield. If equal to ios_base::oct, formats like the printf o specifier. Else if equal to ios_base::hex, formats like x or X with ios_base::uppercase unset or set respectively. Otherwise, formats like d, ld, lld for signed and u, lu, llu for unsigned values. Note that if both oct and hex are set, neither will take effect.
If ios_base::showpos is set, '+' is output before positive values. If ios_base::showbase is set, '0' precedes octal values (except 0) and '0[xX]' precedes hex values.
Thousands separators are inserted according to numpunct::grouping() and numpunct::thousands_sep(). The decimal point character used is numpunct::decimal_point().
If io.width() is non-zero, enough fill characters are inserted to make the result at least that wide. If (io.flags() & ios_base::adjustfield) == ios_base::left, result is padded at the end. If ios_base::internal, then padding occurs immediately after either a '+' or '-' or after '0x' or '0X'. Otherwise, padding occurs at the beginning.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2344 of file locale_facets.h.
| iter_type std::num_put< _CharT, _OutIter >::put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| unsigned long long | __v | ||
| ) | const [inline] |
Numeric formatting.
Formats the integral value v and inserts it into a stream. It does so by calling num_put::do_put().
Formatting is affected by the flag settings in io.
The basic format is affected by the value of io.flags() & ios_base::basefield. If equal to ios_base::oct, formats like the printf o specifier. Else if equal to ios_base::hex, formats like x or X with ios_base::uppercase unset or set respectively. Otherwise, formats like d, ld, lld for signed and u, lu, llu for unsigned values. Note that if both oct and hex are set, neither will take effect.
If ios_base::showpos is set, '+' is output before positive values. If ios_base::showbase is set, '0' precedes octal values (except 0) and '0[xX]' precedes hex values.
Thousands separators are inserted according to numpunct::grouping() and numpunct::thousands_sep(). The decimal point character used is numpunct::decimal_point().
If io.width() is non-zero, enough fill characters are inserted to make the result at least that wide. If (io.flags() & ios_base::adjustfield) == ios_base::left, result is padded at the end. If ios_base::internal, then padding occurs immediately after either a '+' or '-' or after '0x' or '0X'. Otherwise, padding occurs at the beginning.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2348 of file locale_facets.h.
| iter_type std::num_put< _CharT, _OutIter >::put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| double | __v | ||
| ) | const [inline] |
Numeric formatting.
Formats the floating point value v and inserts it into a stream. It does so by calling num_put::do_put().
Formatting is affected by the flag settings in io.
The basic format is affected by the value of io.flags() & ios_base::floatfield. If equal to ios_base::fixed, formats like the printf f specifier. Else if equal to ios_base::scientific, formats like e or E with ios_base::uppercase unset or set respectively. Otherwise, formats like g or G depending on uppercase. Note that if both fixed and scientific are set, the effect will also be like g or G.
The output precision is given by io.precision(). This precision is capped at numeric_limits::digits10 + 2 (different for double and long double). The default precision is 6.
If ios_base::showpos is set, '+' is output before positive values. If ios_base::showpoint is set, a decimal point will always be output.
Thousands separators are inserted according to numpunct::grouping() and numpunct::thousands_sep(). The decimal point character used is numpunct::decimal_point().
If io.width() is non-zero, enough fill characters are inserted to make the result at least that wide. If (io.flags() & ios_base::adjustfield) == ios_base::left, result is padded at the end. If ios_base::internal, then padding occurs immediately after either a '+' or '-' or after '0x' or '0X'. Otherwise, padding occurs at the beginning.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2397 of file locale_facets.h.
| iter_type std::num_put< _CharT, _OutIter >::put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| long double | __v | ||
| ) | const [inline] |
Numeric formatting.
Formats the floating point value v and inserts it into a stream. It does so by calling num_put::do_put().
Formatting is affected by the flag settings in io.
The basic format is affected by the value of io.flags() & ios_base::floatfield. If equal to ios_base::fixed, formats like the printf f specifier. Else if equal to ios_base::scientific, formats like e or E with ios_base::uppercase unset or set respectively. Otherwise, formats like g or G depending on uppercase. Note that if both fixed and scientific are set, the effect will also be like g or G.
The output precision is given by io.precision(). This precision is capped at numeric_limits::digits10 + 2 (different for double and long double). The default precision is 6.
If ios_base::showpos is set, '+' is output before positive values. If ios_base::showpoint is set, a decimal point will always be output.
Thousands separators are inserted according to numpunct::grouping() and numpunct::thousands_sep(). The decimal point character used is numpunct::decimal_point().
If io.width() is non-zero, enough fill characters are inserted to make the result at least that wide. If (io.flags() & ios_base::adjustfield) == ios_base::left, result is padded at the end. If ios_base::internal, then padding occurs immediately after either a '+' or '-' or after '0x' or '0X'. Otherwise, padding occurs at the beginning.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2401 of file locale_facets.h.
| iter_type std::num_put< _CharT, _OutIter >::put | ( | iter_type | __s, |
| ios_base & | __io, | ||
| char_type | __fill, | ||
| const void * | __v | ||
| ) | const [inline] |
Numeric formatting.
Formats the pointer value v and inserts it into a stream. It does so by calling num_put::do_put().
This function formats v as an unsigned long with ios_base::hex and ios_base::showbase set.
- Parameters:
-
__s Stream to write to. __io Source of locale and flags. __fill Char_type to use for filling. __v Value to format and insert.
- Returns:
- Iterator after writing.
Definition at line 2422 of file locale_facets.h.
Member Data Documentation
locale::id std::num_put< _CharT, _OutIter >::id [static] |
Numpunct facet id.
Definition at line 2264 of file locale_facets.h.
The documentation for this class was generated from the following files:
