Computer Science
NETWAVE_CS(4) NETWAVE_CS(4)
NAME
netwave_cs - Xircom Creditcard Netwave device driver
SYNOPSIS
insmod netwave_cs.o [pc_debug=n] [domain=n] [scram-
ble_key=n] [mem_speed=n] [irq_list=i,j,...]
DESCRIPTION
Netwave_cs is the low-level Card Services driver for the
Xircom Creditcard Netwave PCMCIA wireless network adapter.
When this driver is attached to a card, it allocates the
next available ethernet device (eth0..eth#). This device
name will be reported in the kernel log file, and will be
passed on to cardmgr(8).
The wireless domain number and scrambling key can be spec-
ified using module parameters when the module is loaded.
These parameters should be specified in /etc/pcmcia/con-
fig.opts.
PARAMETERS
pc_debug=n
Selects the PCMCIA debugging level. This parameter
is only available if the module is compiled with
debugging enabled. A non-zero value enables debug-
ging.
domain=n
Selects what access point(s) to talk to, by their
domain number. Values from 0 to 0x1ff are valid;
0x100 is the default.
scramble_key=n
Selects the scramble key for domains that are
scrambled. Values from 0 to 0x1ff are valid. The
default is 0 (no scrambling).
mem_speed=n
Sets the access speed of the shared memory window,
in nanoseconds. The default is 0 (i.e., no extra
wait states). Values of up to 1000 are legal.
irq_list=i,j,...
Specifies the set of interrupts that may be allo-
cated by this driver.
BUGS
The statistics reported back from the driver are wrong.
AUTHORS
Dag Brattli - dagb@cs.uit.no
John Markus Bjorndalen - johnm@staff.cs.uit.no
David Hinds - dhinds@hyper.stanford.edu
SEE ALSO
cardmgr(8), pcmcia(5).
pcmcia-cs 1999/02/08 08:02:03 1
Back to the index